Emove Motor Mover

ClubMember51C710E7CA
ClubMember51C710E7CA Forum Participant Posts: 1
edited May 9 in Parts & Accessories #1

Hi all newbie question.

Have an emove motor mover and the remote control flash green when you switch it on, I have changed the battery as at first I thought of flat battery on remote.

No Joy still did not work, Also charged the leisure battery also with no joy and the red isolator switch is in on position and cannot get the motor mover to work and move caravan.

At a total loss of what to check next even looked at box under seat inside and tried pressing the reset button still with no joy HELP ???

 

Paul 

Comments

  • eurortraveller
    eurortraveller Club Member Posts: 6,828 ✭✭✭
    2,500 Likes 1000 Comments
    edited May 8 #2

    If you still have a problem …The E move caravan mover support helpline number is 0161 509 5503. Mondays to Fridays 9am to 3pm.

  • commeyras
    commeyras Forum Participant Posts: 1,853
    1000 Comments
    edited May 9 #3

    I have an EMover.  The instructions say:

    'Green LED is blinking, no buzzer: no communication between handset and control unit.  This could be because of too much distance between remote control handset and control unit, or the battery isolation switch for manoeuvring system is not turned on or that there is a distorted signal disturbing the communication'.

    It suggests:

    Badly connected or corroded battery terminals, clean and connect again.

    Distance between remote and caravan should not be more than 5 mtrs.

    Check if there is any distortion signal (other transmitter, high power cables, wi fi etc)

    If all else fails contact your EMover supplier.  Good luck.

    PS.  If you go into 'My Profile' you can give yourself a nice name! 

  • commeyras
    commeyras Forum Participant Posts: 1,853
    1000 Comments
    edited May 9 #4

    Also, have you checked the fuse between caravan battery and the isolation switch (the red one).  There should be one.

Categories