How to remove Coachman Master control panel ?
I am told there is a 1 amp fuse behind the master control panel ..(electronic control panel) situated above the door ... how can I remove this to check the inline fuse???
currently no display on it ... as had an electrical disaster with the main battery....
I currently have removed the plastic cover over the buttons OK.
But the electronic board and display are held ind with a couple of screws... removed now but the unit seems attached behind ..... some what reluctant to yank it right out .
Any clues ???
Make: Coachman Model: Platinum Pastiche
Model Key: 470 Year: 2012
Comments
-
-
Update ..... For someone elses refference !!!
I have now eased it out of the mounting plastic hardware.... connections to the board are all on the bottom of the display panel (lots of them.. Also found the inline 1 amp fuse ..( blown) replace it and the panel appears to work now :-)
3 -
Thankyou so much for putting this on weve had to fix ours this morning worked a treat
1 -
What can cause the 1 amp fuse to blow ? I have an issue, the fuse keeps blowing thanks
0 -
Hi Keith,
I wondered if you can help? I have a coachman laser 2016 and the control panel keeps fading. I have brought a replacement panel but I am struggling to get the face off the panel. I am reluctant to force it. I can see from this old post you have successfully removed yours. Please could you tell me the technique?
many thanks
0 -
-
Hi Keith,
When you said no display, was there absolutely nothing, or did you have a backlit screen only with no data displayed or was there nothing at all.
Also there is some resistance to removing the screen cover, did you experience the same.
Thanks
0 -
There are 4 small stiff clips, 2 on each side of the outer cover of the panel.
You will have to use a screw driver to carefully ease the 2 clips from each side of the panel and it takes care and courage not to break or damage it!!!
Good luck
0
