Truma Combi 4E fault E602 H
Going to use the vehicle today, putting the hearing on the Truma panel displays E602 H ( both in gas and electric modes). Searching here I can’t find anything previous, doing a Google search a suggestion it’s possibly an electric issue, No heating or hot water, we’ve returned home. Ive emailed Truma support this afternoon, however they won’t respond until tomorrow so just wondering if anyone here knows of this error code, or experience of it previously.
many thanks in anticipation
Stewart
Comments
-
Stewart
Have you tried to reset the boiler by pressing the reset button on the rear of the boiler?
David
1 -
Not familiar with that specific fault code, but always worth trying a hard reset on the Truma unit. There seems to be a few variations on the precise location of the reset button but generally it’s a little red button under the plastic cover - Google ‘Truma 4E hard reset’ and you’ll find plenty of videos out there illustrating what to do. If that doesn’t clear the fault, you may have a PCB fault
1 -
Very prompt response from Truma this morning;
fault code 602 in indicating an overvoltage to the combi boiler. advise checking 12v power supply then wait 15 minutes until the fault code has gone solid, scroll round to the exclamation mark in the triangle and press twice, this has cleared the fault and all working again thankfully.
If this does not clear the fault, then a hard reset required.
Hope this assist anyone with this fault in the future.
1 -
I guess anything that can generate a voltage surge/spike could create the error……vehicle alternator, solar controller or just abruptly shutting off the supply to live circuits.
0
