Alde overheat error

admiral halsey
admiral halsey Forum Participant Posts: 31
edited June 2019 in Motorhomes #1

Thanks for reading.

I recently changed the coolant fluid in our Bailey Approach 540 Alde heating system. The MH was tilted to facilitate bleeding, which appeared to go well as we had no issues in our first outing following the change. However, I am now getting a red overheat error on the 3010 display.

Having rooted around the net and youtube, I am advised that this is most likely an air lock. In the first instance the electric side of the boiler failed. This was resolved by a "reset" and removal of fuses on the boiler and the 12v feed. Unfortunately, the red overheat screen remains. 

I would like to resolve this without having to resort to my local service shop as they messed me around for months with a previous issue.

Words of wisdom please.

 

AH

Comments

  • viatorem
    viatorem Forum Participant Posts: 645
    edited June 2019 #2

    Did you bleed the system, especially the bathroom radiator? Try turning pump to max then bleed again

  • EasyT
    EasyT Forum Participant Posts: 16,194
    1000 Comments
    edited June 2019 #3

    Phone the very helpful people at Alde in Wellingborough for advice.

  • admiral halsey
    admiral halsey Forum Participant Posts: 31
    edited June 2019 #4

    Thanks for the replies.

    Yes, I have gone through the bleed process, with the temp at 30  and pump max three times now. Plus three resets and fuse & 12v feed removal.

    Cautious about using electric water heating, whilst error showing!

    AH

Categories