Bailey Pursuit 2016 13Pin wiring colours

Clincton
Clincton Forum Participant Posts: 8
edited May 2017 in Towcars & Towing #1

Does anybody know what wire colour system Bailey uses for the plug for the caravan.

I have found a diagram of the colours I have on mine but I'm not sure that the Ignition and Permanent colours are on the correct pins in this diagram.

I have wired my mine like this after changing the plug but now the ATC only comes on when the ignition is on (bit of a give away I know) but does anybody know? or have the information.

Please note this diagram is something I've found on the internet and is not associated with Bailey.

Comments

  • JVB66
    JVB66 Forum Participant Posts: 22,892
    1000 Comments
    edited May 2017 #2

    First why did you need to change the plug?

    if it was faulty it would come under a warranty claim,i think there is diagram in your hand book 

     

  • Clincton
    Clincton Forum Participant Posts: 8
    edited May 2017 #3

    Was advised by Campbell Caravans Preston to change as I was onsite at the time.

    The Green Flag man disconnected it while I was getting the plug from my boot.

    The diagram is in the handbook for the pins but not the wiring colours.

  • Clincton
    Clincton Forum Participant Posts: 8
    edited May 2017 #4

    I have now found out by looking at another Bailey Pursuit 2016 that the wiring is as suspected the 12V perm and 12V ign are the opposite way around from the diagram in the original post.

    So for those with a similar problem this the way your Bailey Pursuit 2016 with the coloured cable depicted should be wired

    Pin 1 - Yellow    Pin 2 - Blue    Pin 3 - White     Pin 4 - Green

    Pin 5 - Brown    Pin 6 - Red     Pin 7 - Black     Pin 8 - Orange

    Pin 9 - Blue/Brown       Pin 10 - Red/Brown     Pin 11 - Green/White

    Pin 12 - NOT USED     Pin 13 - Blue/White

    I cannot find any information readily available anywhere to tell you this even a Bailey Service Centre.

Categories