Quick & Simple.

2»

Comments

  • Cornersteady
    Cornersteady Club Member Posts: 14,431 ✭✭✭
    5,000 Likes 1000 Comments Name Dropper Photogenic
    edited January 2018 #32

    OK, what is a PCD?

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,149 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited January 2018 #33

    No worries.

    My point is really about excluding a section of the forum users by not explaining or by assuming others are on the same wavelength when they’re clearly not.

    It’s not good to be excluded and even those who are not familiar with the term may well he able to supply ideas or may be sat beside someone with the answer. It only takes a few more words.

    There you go, let’s leave it there.

     

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,149 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited January 2018 #34

    Out of interest, GC, why have you decided on winter wheels rather than axle stands or similar? 

  • huskydog
    huskydog Club Member Posts: 5,460 ✭✭✭✭✭
    1000 Comments
    edited January 2018 #35

    It is 

    Picture Centre Dimension,  its whet you need to measure when hanging a picture on the wall to make sure it's straight cool

  • Cornersteady
    Cornersteady Club Member Posts: 14,431 ✭✭✭
    5,000 Likes 1000 Comments Name Dropper Photogenic
    edited January 2018 #36

    Ok, why is that needed for a caravanwink

  • huskydog
    huskydog Club Member Posts: 5,460 ✭✭✭✭✭
    1000 Comments
    edited January 2018 #37

    Don't you hang pictures in your caravan?smile

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,149 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited January 2018 #38

    They’re good for covering damp patches. surprised

  • G Cherokee
    G Cherokee Forum Participant Posts: 402
    100 Comments
    edited January 2018 #39

    Good grief TW was that humor??? 

    There you go didn't hurt did it ????

    P.C.D is pitch circle, diameter.

    It's the diameter through the centres of the holes or studs spaced equidistant around a circumference ie, wheel bolts.

    On something with four holes\studs it's easy as it's the measurement between the centres of two opposites. But on items with an uneven amount of holes/studs, you will need to work out the pitch circle diameter.

     

    Quick and simple ????  Obviously not and quite impossible.

  • G Cherokee
    G Cherokee Forum Participant Posts: 402
    100 Comments
    edited January 2018 #40

    I totally refuse to answer this question on the grounds I might say something that someone else may not understand, therefore offending other people that don't know what the hell is going on either.

     

     

     

    Tweet.

  • huskydog
    huskydog Club Member Posts: 5,460 ✭✭✭✭✭
    1000 Comments
    edited January 2018 #41

    I've spend most of my life not knowing what the hell is going on , but I've had fun cool, stay cool

  • Navigateur
    Navigateur Club Member Posts: 3,880 ✭✭✭✭✭
    1000 Comments
    edited January 2018 #42

    Whats "winter"?

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,149 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited January 2018 #43

    I’ve been using humour on this forum since before you'd discovered which end of a caravan is which. I’ve learnt, though, that humour is subjective and it’s easy to miss the mark. You’ll have discovered that now.

    It also pays to use smileys to indicate humour otherwise the comments, like your first two above, can appear to be rather insulting.

    I know what PCD is and didn’t need an explanation but I see you've chosen not to answer my question about the winter wheels. That’s no skin off my nose but means you’re not likely to benefit from my experience. 

    It’s a shame really that you couldn't let it go but had to come back with more supposedly smart remarks. Your loss.

  • G Cherokee
    G Cherokee Forum Participant Posts: 402
    100 Comments
    edited January 2018 #44

    Wow!!! Stick a fork in me, I'm done.

     

    The explanation was not for your benefit, someone asked, I replied. wink

     

     

  • Vulcan
    Vulcan Forum Participant Posts: 670
    edited January 2018 #45

    I quite agree, what a lot of inane comments. If you don't know what PCD. means just don't comment.