Fitting a Cycle rack to a MH

fatbelly
fatbelly Forum Participant Posts: 438
100 Comments
edited August 2017 in Motorhomes #1

Hi All,

We want to fit a cycle rack to our Bailey Autograph MH. I've seen the rack on the net and want to order but was wondering how hard is it to self fit?

Our Van has grey egg shaped fittings on the rear for the rack to fit onto and I did try to remove these but they were very stiff and I did want to pull to hard and damage them so I let alone until I got advice from you guys.

 

Comments

  • Paolo Imberino
    Paolo Imberino Forum Participant Posts: 86
    edited August 2017 #2

    Hi Fatbelly.

    One aspect you may not have thought of. If you have electric bikes then these weigh, without the batteries, 20kg ish and they are friggin heavy to lift onto a high bike rack. I have a Bolero 714SB but I've had professional fitted a Thule electric bike rack. Hardwired direct into habitation batteries with a 16amp fuse and an interior isolation switch. I press a button at the back of the motorhome and the bike rack goes up and down to 12 inches from the ground with 2 electric bikes.

    Either way I would have the rack professional installed. I would hate for you to scratch/dent your van.

     

     

  • nelliethedog
    nelliethedog Forum Participant Posts: 41
    edited September 2017 #3

    Hi, fatbelly,

    I fitted a Fiamma bike carrier to my Bailey Approach - very easy, just followed the instructions. My m/h came with the two grey horizontal fixing bars already fitted and I just e-mailed a pic to Fiamma who ensured I ordered the correct one. Hope this helps

  • Unknown
    Unknown
    edited September 2017 #4
    This content has been removed.

Categories