Alarm monitor continually bleeping

Romatone
Romatone Forum Participant Posts: 22
edited December 2015 in Caravans #1

I noticed that the internal monitor in my Bailey Pegasus constantly bleeps when it picks up movement inside the van.  I thought I had read somewhere that changing the batteries may be the problem but unfortunately not. the alarm still works correctly when
set., but emits this annoying bleeps when it picks up movement inside when  off. . The  little red light does come on sometimes , as it always had done so, Is there some reset procedure after replacing the batteries ? Have taken the batteries out now .as it's
very annoying.. Anyone had this problem ? 

Would appreciate some help 

Comments

  • Romatone
    Romatone Forum Participant Posts: 22
    edited December 2015 #2

    Hi , a couple of days ago I posted some details about a problem with my alarm as I haven't received a reply I assume no one had had the same fault., or perhaps I didn't  explain my fault correctly. so I'll try again

    Somewhile ago I noticed the Pir sensor was emitting a audible bleep ..not loud but annoyingly so. In fact although i had the red light flashingm the bleepiing seemed to pickup when you took breath. Having spoken to a local dealer they explained it could
    be due to low battery power.I took there advice and replaced the two small batteries in the  Pir. ( I do not have tracker ) this has made no difference .i had assumed that when I set the alarm from the Fob when outside as it was still alarming the van, but
    today when I was leaving I pressed the button to alarm it , all seemed ok.but within 20 seconds the alarm started going off. As my neighbours would not be to happy with this I have had to remove the batteries in the Pir. Not sure my insurance company would
    want to know this.

    Has no one experienced this. .?

    I would appreciate some advice

    thanks

     

Categories