No 12v lights or flush working following move

Drf Rock
Drf Rock Forum Participant Posts: 5
edited August 2016 in New to Caravanning & Touring #1

Hi everyone and thanks for all the welcome responses. I have a question. I recently moved my Bessacarr Cameo 550GLD after it had been stood on the same site for about 5yrs, some 170 miles. When I got to the new site, I plugged into the mains, all ok, except
the toilet flush and the small 12v lights not working. This is the first time I have ever moved it, having bought it second hand on the previous site. Any help much appreciated. Thanks    

Comments

  • EmilysDad
    EmilysDad Forum Participant Posts: 8,973
    1000 Comments
    edited August 2016 #2

    what about any other 12 volt appliance? Could be as simple as a fuse that's popped ..... they do age, and 170 miles of being bumped along might have been too much for it. 

  • commeyras
    commeyras Club Member Posts: 1,853 ✭✭✭
    1000 Comments
    edited August 2016 #3

    Sometimes you need to have the light switch turned on in order for the wc to work.  Otherwise agree with MM.

  • cyberyacht
    cyberyacht Forum Participant Posts: 10,218
    1000 Comments
    edited August 2016 #4

    If it's a multiplicity of 12v appliances, it's almost certainly a fuse.

  • KjellNN
    KjellNN Club Member Posts: 8,668 ✭✭✭
    2,500 Likes 1000 Comments Name Dropper
    edited August 2016 #5

    12v may need to be re-selected to be on after towing.

    On panel above door maybe?

  • Drf Rock
    Drf Rock Forum Participant Posts: 5
    edited August 2016 #6

    Thanks everyone. Any idea where the fuses are likely to be ? The lights did flicker before going off though a couple of times, which seems odd. Someone suggested a bad to connection to teh battery maybe, but not sure where taht is either. The trips are all
    loocated in a box under a seat, where there also seems to eb some kind of additional charger. I have one wherring away next to where the mains supply is plugged in and this other one next to the trip board.

    Thanks

  • Pippah45
    Pippah45 Forum Participant Posts: 2,452
    1000 Comments
    edited August 2016 #7

    Could you have dislodged the connection to the battery by moving it?  Fuses are often inaccessible under the beds!  My current one has been at the front under the bed - and have also had them under the bed nearest the kitchen. 

  • commeyras
    commeyras Club Member Posts: 1,853 ✭✭✭
    1000 Comments
    edited August 2016 #8

    It does sound more and more like a fuse.  Have you not got a panel somewhere containing a load of spade type fuses (same type as in a car) which protect the various circuits, in my Bailey they are by a front bed.   Also near the battery there will  be a fuse on the red cable which may be faulty - mine is tucked under the battery box accessible from under the bed.  Get them all out check them and clean them.

    Doesn't the handbook help? A multimeter is a useful bit of kit to have for the amateur to check for electrical faults.  If in doubt get the system checked out properly by an electrician who shoulld solve the problem in a couple of minutes!

  • KjellNN
    KjellNN Club Member Posts: 8,668 ✭✭✭
    2,500 Likes 1000 Comments Name Dropper
    edited August 2016 #9

    I take it you do not have a handbook?  Do you know the model year?

    The number engraved on the windows can give you that if you do not know.

    Then you can get handbooks from the Swift website.

  • KjellNN
    KjellNN Club Member Posts: 8,668 ✭✭✭
    2,500 Likes 1000 Comments Name Dropper
    edited August 2016 #10

    Maybe some help here......

    http://bessacarr-owners-club.org/

  • Drf Rock
    Drf Rock Forum Participant Posts: 5
    edited August 2016 #11

    Excellent, thanks all. I will get a copy of the owners manual and check out the fuses.

Categories