Undoing fittings on water housing

Purplelou
Purplelou Forum Participant Posts: 10
edited March 2023 in Caravans #1

I have a 1998 Abi Dalesman and am looking to replace the water inlet housing. However we’re struggling to get the pipe fittings off. They appear to be push fittings and after looking on YouTube look like John Guest fittings. However the advice given on these videos is not working. We have lubricated and tried many different methods but no luck. 
These are black fittings and the ones in the video are grey so maybe an older version. They have probably never been removed since the caravan was manufactured. Anyone any ideas? I’ve attached a photo  

 

Comments

  • Burgundy
    Burgundy Forum Participant Posts: 313
    100 Comments
    edited March 2023 #2

    Here’s a cutaway view of how they work.

    Hope this helps

  • EmilysDad
    EmilysDad Forum Participant Posts: 8,973
    1000 Comments
    edited March 2023 #3

    I'd suggest the smaller black collar on the elbow is squeezed towards the elbow at the same time as you pull the fitting away from the filter ..... it'll need to be square to the pipe

  • wh1nbrew
    wh1nbrew Club Member Posts: 86
    First Comment
    edited March 2023 #4

    I use an open ended spanner or an adjustable spanner just wide enough to clear the tubing to pull back the compressable ring.  This works well for me  - household plumbing and the van

  • dave the rave
    dave the rave Forum Participant Posts: 806
    500 Comments
    edited March 2023 #5

    First job would be to remove the blue caps which are a locking system!John Guest can supply a set of plastic tools for depressing the collar on the fitting whilst removing the pipe if you are unable to push it in manually.Looking at your photo I would suspect that the timber insert should be replaced while you have the unit removed.

  • The Ford Family
    The Ford Family Forum Participant Posts: 1
    edited March 2023 #6

    Hi we have a 2017 bailey autograph motorhome and I think the pump must air in, I am unable to get water coming through the taps after winterizing. Can anyone tell me where the pump is located please.