Alloy wheel centre caps

Simon 3566
Simon 3566 Forum Participant Posts: 6
edited January 2022 in Caravans #1

I've lost the alloy wheel centre cap off my 2015 lunar clubman and am looking to get just a generic replacement does anyone know the size in mm that fits 

Comments

  • eribaMotters
    eribaMotters Club Member Posts: 1,193 ✭✭✭✭
    1000 Comments
    edited January 2022 #2

    I hate to state the obvious, but can you not remove the one off the other size to measure it?

     

    Colin

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,142 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited January 2022 #3

    .....and take it with you when you visit factors. 

  • Simon 3566
    Simon 3566 Forum Participant Posts: 6
    edited January 2022 #4

    Both have been pinched 

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,142 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited January 2022 #5

    The facts given earlier would have saved two of us from making pointless suggestions. Never mind. Good hunting.👍🏻

  • eribaMotters
    eribaMotters Club Member Posts: 1,193 ✭✭✭✭
    1000 Comments
    edited January 2022 #6

    If you have a pair of inside calipers or vernier gauge/calipers you could measure the internal bore of the wheel. I'm guessing you do not, so cut a piece of stiff card from the likes of a food packet so it will just slide in across the diameter of the hole touching the opposite sides of the hole. You should now be able to work out the size.

     

    Colin

  • KeithL
    KeithL Forum Participant Posts: 114
    edited January 2022 #7

    Just measure the hole with a rule o tape measure

  • NigelM
    NigelM Forum Participant Posts: 5
    edited January 2022 #8

    Lost one of mine from a 2015 Coachman. Found a site on the internet that gave the size of the cap for the wheel and then ordered. Although only plain bought 4 for less than half the price of buying original which I considered to be very overpriced.

Categories