Milenco Wraith wheel lock

Fozzie
Fozzie Club Member Posts: 550 ✭
500 Comments
edited August 2021 in Parts & Accessories #1

Can anyone that uses the above wheel lock have "issues" with the wheel lock when removing.On mine I have to wiggle to bottom out the key,and then I have found I have to turn the key quite slowly to the right to release the locking mechanism.This is possibly allowing the three ball bearings in the lock to line up with the holes.

It is just the first time I had to remove it,it took me ages thinking it was stuck onto the security wheel stud.

I will contact Milenco,to see what they say,but I have already disposed of the over elaborate plastic blown case!

Comments

  • JVB66
    JVB66 Forum Participant Posts: 22,892
    1000 Comments
    edited August 2021 #2

    Have you tried lubricating the locks

  • eribaMotters
    eribaMotters Club Member Posts: 1,193 ✭✭✭✭
    1000 Comments
    edited August 2021 #3

    Try a ptfe spray, silicon, not WD40 or other oil spray. You need something dry. Foliac [carbon powder] is best if you have any. Any wet lubricant eventually attracts dirt and dust and guns up.

     

    Colin

  • ScreenName0E597EF81D
    ScreenName0E597EF81D Forum Participant Posts: 3
    edited July 2022 #4

    I have just bought a Wraith and have major problems getting the lock off as well. Did you manage to get your money back from Milenco or the dealer?

Categories