2020 Swift Escape 674 front dinette bed layout

Matt Alber
Matt Alber Forum Participant Posts: 4
edited November 2020 in Caravans #1

Does anyone have pictures or video of the 2020 Swift Escape 674 front dinette bed layout make-up before the cushions are laid out?

The issue we have is the telescopic table rests onto the seat bases but the table leaf extension has no support whatsoever apart from the arms which attach it to the table top. My wife is 8 stone and it moves downwards when she kneels on it with and without a cushion this was demonstrated to the dealer in their workshop.

There are videos of 2019 and earlier models with the removable table leg but I can't find anything for the 2020 model with the fixed telescopic leg; the manual only demonstrates how to configure the cushions and not the supporting structure.

The dealer is saying Swift have replied to their enquiry that the table extension supported by fresh air is the correct design/configuration which seems to be a very poor design

Comments

  • lagerorwine
    lagerorwine Forum Participant Posts: 310
    edited November 2020 #2

    You might have more luck in the Motorhome thread

  • EasyT
    EasyT Forum Participant Posts: 16,194
    1000 Comments
    edited November 2020 #3

    I had a similar problem with a caravan with aa long infil section that I felt needed a middle leg. I cut a block of timber (might have been3'' x 2') act a a base. Screwed a piece of wood to it about 3'' tall by the interior size of a section of square drain pipe which went over this and screwed in place

  • Matt Alber
    Matt Alber Forum Participant Posts: 4
    edited November 2020 #4

    Thanks now duplicated in motorhomes.

  • Matt Alber
    Matt Alber Forum Participant Posts: 4
    edited November 2020 #5

    Thats not really an option in this case as it would clash with seating and peoples legs; plus its a band new van and for what they cost it should be right and not require a work around.

Categories