2019 Peugeot Boxer touch screen unit removal

robinofstackpole
robinofstackpole Forum Participant Posts: 26
edited December 2019 in Motorhomes #1

Hi, I've got a 2019 Bailey 79-4, peugeot boxer base. Does anyone know how to get at the back of the touch screen / nav/ radio unit?

I'd like to reroute the camera feed from this unit to a mirror mounted screen so that I can use it as a rear view camera not just a reversing camera.

Apologies if this has been covered before, this is my first post.

 

Comments

  • Unknown
    Unknown
    edited November 2019 #2
    This content has been removed.
  • Heethers
    Heethers Forum Participant Posts: 641
    500 Comments
    edited November 2019 #3

    l have the reversing camera set so its looking at the back so l can reverse, also set in away that l can see what's immediately behind me a good 50 yards up the road, anything further l use the wing mirrors, works perfectly. l can turn mine on and off with the button on the camera, mines attached to the driving mirror. I thought there was two cameras on the Bailey one looking up the road and one looking directly behind an you toggle between the two

  • robinofstackpole
    robinofstackpole Forum Participant Posts: 26
    edited November 2019 #4

    Hi, thank you both for your replies..

    The Bailey only has one camera with the feed through the inbuilt radio / nav system.

    The camera is activated by the reverse gear selection and once on prevents use of any other  functions. It is a fairly wide angle so would work well as a rear view.

    The unit fits tight into the dash so I can't see how I would get any release pins past it

Categories