Alarm going off 1 second after I arm it????

Robster2007
Robster2007 Forum Participant Posts: 38
edited May 2019 in Caravans #1

HI

I have a Conquerer 630 2010 that has just come back from a service.

Every time I set the alarm, it beeps, waits for a second and then the alarm sounds.

Anyone have any idea what the service company have screwed up?

I have already fixed one problem, when I got it home, the Sargent PSU would not switch on, whatever I did, called service company and despite my protestations that the battery should not be flat, they were adamant that it would not switch on because not enough power in the battery.

I finally traced that problem, I keep a power meter connected line so I can monitor my solar panel.

Someone had unhelpfully unplugged this AND not bothered to put a fuse into the fuse holder!

£300 and it has come back worse than it went in!

Plus they used to do a complimentary clean, not any more.  :-(

RobinNO

Comments

  • EasyT
    EasyT Forum Participant Posts: 16,194
    1000 Comments
    edited May 2019 #2

    I recently had a problem with my sergeant alarm. I suggest phoning the company as they are helpful. When the alarm sounds out and you switch off there should be a number of beeps that indicate what the problem is. Having had my alarm replaced under warranty by the dealership it kept false alarming. After counting the number of eeps on switch off I called Sargeant. When the new alarm was installed there is a switch on the internal circuit board that was not switched on. This meant that the alarm internal battery was not getting recharged by the leisure battery. 

Categories