How much?

Swifty2018
Swifty2018 Forum Participant Posts: 196
100 Comments
edited June 2018 in General Chat #1

I am the first to admit I am not particularly mechanically minded and even as a child I was more into Lego than Meccano..

Whilst we are currently away in Spain, my wife's front disc brake on her bike has been playing up.  I have had numerous attempts to solve the problem but to no avail. So today I gave up and we took it the local bike shop for repair/adjustment.

Even with the language problem I was able to demonstrate the brake was not working.

The owner of the very posh cycle shop whisked it into the rear of the shop and returned with it some 7- 8 mins later. I gathered that whilst he had sorted the problem the disc pads were almost worn out.

Having recently read Cornerstready's  post regarding £18 labour charge for attaching a sticky label to his locker, I was wondering would he attempt to rip  us off but when he told us the price our first comment was " How much"

His raised fingers indicated the charge was 3 euros.

Now that is what I call service, as he knew full well he would never see us again. Can you honestly say you would pay the same in Britain?

Comments

  • Unknown
    Unknown Forum Participant
    edited June 2018 #2
    The user and all related content has been Deleted User
  • Bakers2
    Bakers2 Forum Participant Posts: 8,192 ✭✭✭
    2,500 Likes 1000 Comments
    edited June 2018 #3

    Glad you got it sorted. I have popped into cycle shops over here and had minor jobs done for free or an extremely reasonale charge. It happens here too, not limited to over there 😉

  • JVB66
    JVB66 Forum Participant Posts: 22,892
    1000 Comments
    edited June 2018 #4

    I had a Bickerton folder on which the rear wheel bearing gave out when in Weymouth , the cycle shop in the High street was the port of call, i got the sharp intake of breath,as it was old and not repairableundecided,hang on i might be able to help said the owner and promptly disapeared,and came back with a complete rear wheel,and said "this looks the same give it a try if it is no good just get rid of it, as it in my must do something with this lot pile" he would not take any money and it did fit smile  so we went back and gave a donation to the Lifeboat as he was one of the crew

  • Takethedogalong
    Takethedogalong Forum Participant Posts: 17,040 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper Photogenic
    edited June 2018 #5

    Good price Swifty, but there are bargains over here at bike shops as well. My Cube has a wrong way thread on a pedal, bit of a nuisance, and every few miles I had pedal come off, and nut lost! Grr...... OH popped into a bike shop in Berwick while I was back at home, and was given lots of spares free of charge. Ironically, it has not happened since!  Glad repair ok though for you.

  • Oneputt
    Oneputt Club Member Posts: 9,144 ✭✭✭
    2,500 Likes 1000 Comments
    edited June 2018 #6

    Its always struck me that privately owned businesses like bike shops are more likely to be generous than the big chains.  The same is true of some computer repair shops, very often they act like drop in centres for a good jaw and the money seems to be secondary laughing

  • Unknown
    Unknown Forum Participant
    edited June 2018 #7
    The user and all related content has been Deleted User
  • jennyc
    jennyc Forum Participant Posts: 957
    500 Comments
    edited June 2018 #8

    That’s a really odd problem, and particularly on a Cube. Pedals are normally made with one left hand and one right hand thread, so that they tighten up in service. Maybe Loctite would have helped.

  • jennyc
    jennyc Forum Participant Posts: 957
    500 Comments
    edited June 2018 #9

    That’s a really odd problem, and particularly on a Cube. Pedals are normally made with one left hand and one right hand thread, so that they tighten up in service. Maybe Loctite would have helped.

  • Takethedogalong
    Takethedogalong Forum Participant Posts: 17,040 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper Photogenic
    edited June 2018 #10

    They are indeed! And Loctite did help. It's a problem solved now, but irritating at the time. smile

  • Metheven
    Metheven Club Member Posts: 3,987 ✭✭✭
    1,500 Likes 1000 Comments
    edited June 2018 #11

    Good service Swifty, 6 weeks ago in France my wifes folding bike unfolded surprised and luckily it was as we left our pitch (grass) so she escaped relatively undamaged laughing

    The threads stripped in the hexagonal locking socket, went to an engineering firm on an industrial site and they manufactured a new piece. They wanted absolutely nothing for their work and took some persuading to accept some beer money, we were very impressed by their helpfulness.

Categories