Gas regulator for 7kg Calor Butane Bottle

Ray55
Ray55 Forum Participant Posts: 89
edited May 2018 in Parts & Accessories #1

Hello,  I use a 7kg bottle for my caravan with a type 611 regulator I bought some time back from a caravan accessary shop. It is a pain to clip on and I have a problem with it each time. Probably not an original Calor part.

What regulator do you recommend I use. One that is simple and easy to attach. I checked the Calor website but that left me a little confused as to the correct one I need. 

regards

Ray

 

 

 

Comments

  • Vicmallows
    Vicmallows Forum Participant Posts: 580
    500 Comments
    edited May 2018 #2

    That is not a regulator. It is an adapter which then connects to a bulkhead mounted regulator.

    I have found the type of adapter you have very easy to use.  (The ones generally available now are round and smaller, but I find a little bit more tricky!).

    When you are pushing it onto the cylinder, it helps to press the control button in as you push down....as if you were detaching the cylinder.  If it is still tight, a quick spray of silicone lubricant onto the bottle end helps a lot .....or even a little bit of saliva!

     

     

  • Ray55
    Ray55 Forum Participant Posts: 89
    edited May 2018 #3

    Well thanks for that but 'pushing'  it onto the cylinder, even with the 'control' button pressed it is a nightmare each time requiring me to jam a iron bar of sorts through the top of the bottle and top of the 'adapter' to dd pressure to get it into place. maybe it is faulted. ?

     

    Ray

  • Vicmallows
    Vicmallows Forum Participant Posts: 580
    500 Comments
    edited May 2018 #4

    Maybe the adapter is just seized and needs lubricating?

    You haven't by any chance got a 20mm adapter?  Calor bottles are 21mm (and I would not have thought you could even force a 20mm fitting on).

  • Randomcamper
    Randomcamper Club Member Posts: 1,062 ✭✭
    500 Likes 1000 Comments
    edited May 2018 #5

    That was my first thought when i read the OP but the label (although upside down) in the first photo appears to indicate the dia as 21mm.

    But it shouldn't need forcing with a bar, something is very clearly wrong......

  • Ray55
    Ray55 Forum Participant Posts: 89
    edited May 2018 #6

    Dear Vicmallows,   Although I said the mechanism appeared to work well enough I have taken your advise. I applied some silicone spray and left it a little while and it seems to have done the trick. I had just assumed a fitting issue . I suppose the silicone has help with that and mechanism operation. Thank you.  Hard to believe I have put up with this for years. 

    Ray

     

     

     

  • Vicmallows
    Vicmallows Forum Participant Posts: 580
    500 Comments
    edited May 2018 #7

    Even worse are Spanish bottles with 35mm JUMBO push-on connector. Sometimes they can be a real struggle - until you apply a little lubricant! (due to the very large external rubber sealing washer).