Alko ATC and 13 pin adapter

crislowis
crislowis Forum Participant Posts: 3
edited March 2018 in Caravans #1

I've just bought a new caravan which has an Alko ATC system. My tow vehicle has a 7 pin socket but the caravan has 13 pin .

I hooked up with an adaptor but the alko didn't work . I have found out that there is actually a problem with my tow vehicle socket as the indicators (at least, maybe more) are not working . I've booked in for Tuesday to have the electrics fixed but I want to be sure the alko will work with 7 pin and an adaptor .Or shall I just get it converted to 13 pin while it's in there?

Many thanks 

Comments

  • rich 81
    rich 81 Forum Participant Posts: 189
    edited March 2018 #2

    Hi

    do you have the grey socket on your car. If yes and the adaptor is converting both sockets to on 13 pin then yes it will work.  If you only have a black socket on the car then it wont work. The ATC needs a 12 volt supply to work

  • Metheven
    Metheven Club Member Posts: 3,987 ✭✭✭
    1,500 Likes 1000 Comments
    edited March 2018 #3

    Get it converted to a 13 pin, as above ATC won't work with your one socket.

  • Wildwood
    Wildwood Club Member Posts: 3,582 ✭
    1000 Comments 250 Likes Photogenic
    edited March 2018 #4

    if the caravan has the 13 pin socket which I imagine it will have I would get the car converted when it is in.

  • crislowis
    crislowis Forum Participant Posts: 3
    edited March 2018 #5

    Thanks all. Yes the car (van) only has one black socket .So seems the thing to do is convert to a 13 pin .thanks everyone you've saved me paying twice!

  • Cornersteady
    Cornersteady Club Member Posts: 14,431 ✭✭✭
    5,000 Likes 1000 Comments Name Dropper Photogenic
    edited March 2018 #6

    well you will need to make sure the extra wiring is there too to power the 12V for the ATC. Called something like a supplemental harness.

    With the old two socket system the black and grey sockets did different things and had different wiring, the black did the lights and indicators while the grey supplied 12V to charge to the caravan battery and run the fridge when the ignition was switched (I believe) and now powers the ATC, the newer 13 pin just combined the wiring into one sockets, but if you only have a black socket the wiring for the grey socket may not be there.

  • rich 81
    rich 81 Forum Participant Posts: 189
    edited March 2018 #7

    that;s right you will need a battery live feed and an ignition feed i think it has a couple of earths as well. I'm sure they will know what you need when you take it in

Categories