Whale exterior water pump
hi just checking things work before our first outing this year, plugged the whale pump into exterior socket and submerged the pump into aqua roll switched on and nothing happened. The pump light at the pump switch did not light up as it should when taking water.
Unpluged from caravan and notice some green around the connecting metal connectors.
Disassembled the plug two screws to examine inside it did not look too bad no corrosion etc just the green around the the connector edges, Sprayed with wd40 cleans as best I could re assembled, replugged in and reluctantly it worked.
I have a new spare tried that no problem worked fine, wondered if anyone out there has had similar issue.
Should it be stored over winter inside house, sprayed with wd40 or greased up before leaving caravan over winter???
The van is a Elddis 550 2016.
regards
Comments
-
And you may need the gently bend the 'contacts' on the plug with some long nossed pliers to give a firmer contact between the pump end and the caravan end. You seem to have solved the problem already. It is very wise to carry a spare. I just store mine in the caravan over winter.
0 -
We have a 2014 550 and have experienced similar thing which we resolved by adjusting the pressure flow. If you have the Whales leaflet that explains how to adjust.
If you havent got it take a look at Whales site its on there to be printed off.
0 -
Thanks to all who kindly posted a reply this has been very informative and just what this forum is about helpful information sharing.
Thanks again something learned and sorted
0