How long is a piece of string?!

redsettercamping
redsettercamping Forum Participant Posts: 10
edited January 2016 in Parts & Accessories #1

Looking for general advice from anyone with experience please. We often use 'super' pitches, but usually just collect our grey water in the conventional container, and dispose at the appointed location. This year however, we want to buy a length hose, to
link the caravan to the water waste disposal point on the pitch. My question is, how long would you recommend that the hose should be, just every site seems to have the drainage point in different loctions! Looking to get an idea of what others have found
to be an average length? Clearly it depends on where your waste water exits the caravan (ours is near to wheel arch, so half the length of the caravan)

Comments

  • EmilysDad
    EmilysDad Forum Participant Posts: 8,973
    1000 Comments
    edited January 2016 #2

    Not that I use many super pitches, but I have a few lengths of waste pipe and join them if need be with a push fit waste connector
    like this

  • cyberyacht
    cyberyacht Forum Participant Posts: 10,218
    1000 Comments
    edited January 2016 #3

    Whatever length you get, it will be a foot short.

  • TheAdmiral
    TheAdmiral Forum Participant Posts: 506
    edited January 2016 #4

    3 x 6 foot lengths with connectors would suffice for most wast connections

    Admiral

  • KjellNN
    KjellNN Club Member Posts: 8,672 ✭✭✭
    2,500 Likes 1000 Comments Name Dropper
    edited January 2016 #5

    We carry 6m of rigid waste, and the 6m of the old bendy waste pipe we had originally.

    I cut the rigid pipes into 2 x 1.5m and 3 x 1m, they fit in the front locker.   Then I have an assortment of connectors and bends to join them to make a suitable layout.

    Plus I made some X supports in wood to enable a smooth gradient to the drain to be achieved.

  • EmilysDad
    EmilysDad Forum Participant Posts: 8,973
    1000 Comments
    edited January 2016 #6

    We carry 6m of rigid waste, and the 6m of the old bendy waste pipe we had originally.

    I cut the rigid pipes into 2 x 1.5m and 3 x 1m, they fit in the front locker.   Then I have an assortment of connectors and bends to join them to make a suitable layout.

    Plus I made some X supports in wood to enable a smooth gradient to the drain to be achieved.

    You should've been on Blue Peter Innocent

Categories