Soil full - Help
Twice the "soil full" warning has flashed up and bleeped ,no problem I thought and drove to the mhsp and emptied the waste tank ,but it still warning me ,doesnt matter what I press on the control panel I can't stop it ,unless I unscrew the panel and disconnect
the 12volt feed to the back of the unit , am I doing something wrong ? .the control panel says "CMS2000" on the front
Comments
-
Our light sometimes comes on after the tank has been emptied. All it requires to clear it is to flush some water into the tank.
David
0 -
as Michael says, these probe type sensors are notoriously prone to getting covered with gunk, giving totally misreading readings...
if your tank has an inspection hatch or access to the sensor 'block', it can be retrieved and the prongs placed in a jar of (say) white wine vinegar or other 'kettle cleaning' type products...often limescale can be the culprit.
good luck..
0 -
The readings for my Elddis M/H water tank have been wrong for months - always reading 3/4 full whatever is in there. Then the other month the 'full' light came on for the waste tank and I haven't been able to turn it off yet. It's in for it's first habitation
next month so I'll get them to sort it then. I can't believe we almost had the van a year soon - doesn't time fly by???i hope you're enjoying your new van Husky
0