Milenco levellers and motormover

flatcoat
flatcoat Forum Participant Posts: 1,571
1000 Comments
edited August 2016 in Caravans #1

i am considering buying a pair of Milenco screw type levellers for our t/a van. We also have a 4 wheel drive m/mover fitted (powertouch). it looks as though the clearance for the Milenco might be too tight to avoid the leveller and mover coming into contact.
Before I spend the thick end of £200 and find there is a problem, does anyone on here use the Milenco on a t/a with a mover? 

Comments

  • richardandros
    richardandros Club Member Posts: 2,690 ✭✭✭
    1,000 Likes 1000 Comments Name Dropper Photogenic
    edited August 2016 #2

    If you're contemplating spending that sort of money, why not consider the Lock 'n Level which I can assure you does not have any issues with AWD motor movers.  I've used mine on out TA Barcelona for the past 18 months and wouldn't be without it.Happy

  • flatcoat
    flatcoat Forum Participant Posts: 1,571
    1000 Comments
    edited August 2016 #3

    I have looked at that and is impressive, seems a bit of a faff to set it up and is now well over £200. There has to be a limit to spending. 

  • richardandros
    richardandros Club Member Posts: 2,690 ✭✭✭
    1,000 Likes 1000 Comments Name Dropper Photogenic
    edited August 2016 #4

    Flatcoat - agree that one has to spend sensibly - but the TA version is well under £200 at £170.  If it helps - I bought the combo pack 18 months ago and I've only ever used both on one occasion, so the single air bag was unnecessary and levelling on the
    offside can easily be achieved with a plank of wood, employing the L 'n L to fit the wheel locks only - for which, in my opinion, there is no easier way.      I've got it off the a fine art now, and I reckon and I can achieve level and fit the twin locks within
    5 minutes or so.

Categories