Flashing red light on control panel

Mr Gee20
Mr Gee20 Forum Participant Posts: 9
edited November 2020 in Motorhomes #1

Just put my motorhome on EHU at home and now have a red warning light flashing and code P30 anyone know what this means. Any help would be appreciated.

Comments

  • JVB66
    JVB66 Forum Participant Posts: 22,892
    1000 Comments
    edited November 2020 #2

    Could be a wiring fault ,check that all the plugs and sockets to the house correctly wired 

    have you got a plug/socket tester 

    what "panel " is it

     

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,134 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited November 2020 #3

    As JVB questioned, I think you need to tell us if it's the main control panel or the heating/hot water control panel, the make and model number.

    Meanwhile, have a check on Google using the make and model details. 

  • Navigateur
    Navigateur Forum Participant Posts: 3,880
    1000 Comments
    edited November 2020 #4

    Does the flashing stop when the EHU is unplugged?

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,134 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited November 2020 #5

    💡Reversed polarity?

  • LLM
    LLM Forum Participant Posts: 1,555 ✭✭
    500 Likes 1000 Comments
    edited November 2020 #6

    As a matter of interest what does your handbook say about a red flashing light?

  • Mr Gee20
    Mr Gee20 Forum Participant Posts: 9
    edited November 2020 #7

    Thanks everyone for your input but cannot find anything in handbook about flashing red light. Just returned from a 2 month tour of Scotland with no problems at all.

    Main Control panel for lights water pump etc on our Adria Compact dl m/h  just put it on EHU at home to top up batteries. 

    Once again thanks for all your help.

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,134 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited November 2020 #8

    I meant the make and model number of the control panel.....

  • SteveL
    SteveL Club Member Posts: 12,299 ✭✭✭✭✭
    1000 Comments
    edited November 2020 #9

    If it's like the one in our MH, it may not have one. Ours just has a Hymer logo.

  • SeasideBill
    SeasideBill Forum Participant Posts: 2,112
    1000 Comments
    edited November 2020 #10

    Maybe a Schaudt unit? You could reset the control panel by disconnecting the batteries. If that clears the error you might have experienced a voltage spike?

  • Mr Gee20
    Mr Gee20 Forum Participant Posts: 9
    edited November 2020 #11

    Control panel is the Nordelelttronica ne266 on our 2020 Adria Compact motorhome. No mention of P30 in owners manual so I am stumped. Tried to contact Becks motorhomes but are closed until December. Many thanks to all. MIck 

  • Tinwheeler
    Tinwheeler Forum Participant Posts: 23,134 ✭✭✭
    10,000 Likes 1000 Comments Name Dropper
    edited November 2020 #12

    Right. It's Italian and I don’t know if there are service agents in the UK. Googling "Nordelettrica NE266 fault codes" brought up loads of hits. I'll leave you to plough through.

    Nordelecttronica have a contact section on their website. Why not try emailing their Technical Support team?

    https://www.nordelettronica.it/en/Contatti

    It’s a control panel that was used by a lot of UK MH manufacturers at one time but they seem to favour Sargent these days.

  • SeasideBill
    SeasideBill Forum Participant Posts: 2,112
    1000 Comments
    edited November 2020 #13

    Nordelettronica don’t enjoy the best of reputations. I had their units fitted to a Trigano MH I had several years back and it randomly flashed faults which I ignored without consequence. Their user manuals are largely useless. I would try a reset (equivalent of ALT+CTRL+DEL for control panel software) and if that doesn’t work contact http://www.aandncaravanservices.co.uk/ who  will be able to advise you and probably repair/supply  a defective component if that proves to be the case.

  • fred sorfleet
    fred sorfleet Forum Participant Posts: 1
    edited June 2022 #14

    We’re on hook up in Swift bolero motorhome woke up through night flashing red light with alarm on fresh water display we’ve got water in tank 

  • TonyIshUK
    TonyIshUK Forum Participant Posts: 296
    100 Comments
    edited June 2022 #15

    When my panel throws a wobbly I disconnect the leisure battery wait a while, and reconnect. Worked on most occasions,

    About the nearest thing to "CTRL+ALT+DEL" you can get on a control panel without having a reset button located conveniently. 

    Sometimes the EHU drops out due to someone fiddling putting their cable on, or off, the unit, or a local voltage drop, due to the local farmer using a welder in what little spare time he / she / they / etc have.

    The alarm may be just saying power has been cut, and some units (generally) heating have to be restarted.

    Rgds

  • Aspenshaw
    Aspenshaw Forum Participant Posts: 611
    500 Comments
    edited June 2022 #16

    The control panel flashes on our Hymer when the fresh water level falls below 25% because that is the lowest level recorded by the sensors in the tank.

    Hymer encourage driving with 20l in the tank 'for safety reasons'. If we did, the control panel will always flash when switched on to fresh water. To stop the flashing we need to have over 35l in the 140 litre tank. If we don't have the control panel switched to fresh water, the fresh water alarm is not visible.

  • bruce lee
    bruce lee Forum Participant Posts: 1
    edited January 2023 #17

    My water pump was iced up so would not turn. I pressed the pump button to turn it on (green) and the pump made a clunk noise and the light when back to amber turning the pump off. The red triangle and P30 error code came up.

    once the pump thawed the pump ran with no error code. Therefore it’s very possible P30 is a pump fault or possibly an over current fault.

Categories