Control panel failin?
i would appreciate some help just arrived a Warwick and thought everything was working ok but suddenly the control panel has gone black. I have power to the sockets both 13 amp and 12v ones the electric hot plate works but the fridge doesn't. No lights cos I have to start them at the control panel. It's this year's Swift Conqueror and it seems bizarre to have some stuff aand not the rest. I can't get the fridge working on gas either.
Comments
-
OK been to the fuse box and numbers 1 - 10 or whatever I understood a red light would show if fuse was gone. No 1 has a green light on and is a 25 amp one. There is a 75 amp one which I would expect to be the control panel et al? No light there. I have some fuses with me but no bigger than 20 amp which didn't change anything.
Incidentally I would sacrifice some accessible cupboard space although this fuse box isn't in a far corner as my previous one but at least that had the trip switches at eye level elsewhere.
0 -
Pippah, I assume you intend to ring the dealer and speak to a technician when they open for business.
0 -
from memory of our Swift MHs with Sargent control panels, they did sometimes freeze....
a remedy was a bit like a PC reboot.....prise off the surrounding bezel, you may then need to unscrew a few holding screws, then you'll see the panel connected by a plug in connector....
just remove it, wait a few seconds and then plug back in.
good luck.
0
