Bailey Pegasus rear grabhaindle led replacement

Cutchy

I have a Bailey Pegasus 2 Bologna. The left hand rear grab handle led has gone out. Does anyone know how to fit replacement led into the handle. I can see where the right hand handle mounting screws are inside the bathroom behind the toilet but the left hand side must be behind the shower.

There must be a way to replace the bulb without removing the handle 

Any Advice please

EmilysDad

Just my thoughts  ..... I don' know, but wouldn't be at all surprised if the handle is a sealed unit designed to be replaced rather than repaired ..... led lit things often are. 🤔

Cutchy

Bailey do sell the red led as a separate part. But I don't know whether the whole handle has to be removed in order to fit the strip. I e-mailed Bailey but still await a reply. 

EmilysDad

Have a practice with the one that's easy to remove 😉

Cutchy

Hi MollysMummy, Heard from Bailey parts they told me to contact a Bailey dealer. I did and their work shop told me to remove the two grey plastic caps at the end of the handle and this would allow the bulb to slide out. It worked. however I also had to remove the rear bumper corner moulding get to the wiring, where I found a corroded connector. I remade the connection and Bingo the light works again.

Cheers for the encouragement.

EmilysDad

Excellent! A nice easy & no cost fix. 😊 I always give connectors a squirt of silicone when I open them. 

Gazza23

Look on YouTube it shows you how to change the led grab handle lights