TV fitting in bedroom

silver badge
silver badge Forum Participant Posts: 1
edited May 2017 in Motorhomes #1

I have bought a Chausson Welcome 728EB. It has a central bed at the rear. At the bottom of the bed is the deviding wall between the bedroom and central wash room. The wall has a television aerial socket, 3 pin plug and 12v plug for TV at the top. The deviding wall is hollow with 2 skins. I am not sure if there is a baton in the middle of the skins at the centre of the wall to take screws for a TV bracket. Has any one fitted a TV bracket to one and if so how? Please.

Comments

  • mickysf
    mickysf Forum Participant Posts: 6,474 ✭✭✭
    2,500 Likes 1000 Comments
    edited May 2017 #2

    I have fitted several TVs to wall panels in the past but it really depends on the size and weight of the TV. I bought a cheap plate hook on type bracket from Tesco for my latest van and used only short screws and it works fine, still solid after 3 years. Draw back is you can't change the angle but we don't need too. Always unclip TV to store when travelling and hang again when on site. It works a treat

  • TonyIshUK
    TonyIshUK Forum Participant Posts: 296
    100 Comments
    edited May 2017 #3

    Maybe try one of the gizmos that can trace studs behind walls. About £15 from Argos (or similar store)

    However I would have thought Chausson would have mounting instructions if plugs and wiring are in place.

    rgds

Categories