ALDE heating again!
We have the original 3010 ALDE heating in our 2011 caravan and the control panel has been upgraded to the 3010 613 which is the colour touch control.
When you touch the screen to see the standby pad you can see the icon that depicts the inside temperature on the left hand side. On the right is the supposedly inside temperature of the caravan. On Friday evening after setting up the heating was not coming
on.
Despite several resets, it still would not work. It was then that I noticed that the temperature reading on the standby screen was in the fifties centigrade. Eventually I figured out it could be moisture on the control panel and after removing the control
panel and using a fan with warm air, the temperature shown dropped down to about 18C and the heating start working,
This morning the inside temprature was reading 70 degrees Centigrade although the outside temperatrue was only 11C! I am not sure why there is such a huge fluctuation in the temperature especially as we have the air con running all night on fan only plus
the bathroom skylight being a bit open to prevent moisture.
Any ideas please.
Comments
-
Speak to Leigh at Alde, very helpful guy.
0
