Swift Conqueror control panel display gone
Mine is a 2018 model and the panel display looks as though the battery is running down? There is a light behind it but the writing is too pale to be readable. I can still stop the stupid alarms going off by pressing the left arrow key but can't do anything else with it.
Comments
-
Try a hard reset ( remove panel disconnect multi plugs leave for 5 mins then reconnect )
0 -
Thanks for that - I am not doing very well at removing the panel - photograph attached and it seems like there is a button centre top that sort of releases a bit of it but the rest isn't coming off - and feels quite fragile?
0 -
Pippah45
the outer frame stays in place you release the panel by placing a knife blade/ small screw driver just under the black printed panel and gently prising from the bottom
0 -
-
The multi plugs are a bit difficult / stiff to remove and in confined space on the back of the board, need tiny fingers but strength to disconnect.
Hope you succeed
0 -
If memory serves me right was quoted circa £300 for a new control panel/board. Sargent do a repair service, turn around time was roughly 5 weeks when I had problem that was when the guy at sergent told me to try a reset as described in my first reply.
0
